Radius cutting attachment
Is mounted on the cross slide in place of the tool holder. For producing convex and concave shapes, for turning radii or 3/4 spheres up to max. 32mm. Height adjustable tool holder (boring tool tip adjustable from 30 through 45mm above cross slide) for use with FD 150/E, PD 250/E, PD 400 and older PROXXON lathes. Dimensions: base plate 67 x 50mm, height 55mm. Complete with finishing cutter 8 x 8 x 80mm. In wooden box with sliding lid.
NO 24 062
Tool holder for rotary tools. For use on lathe machines.
Made of steel with standard 20mm MICROMOT collar size.
For precise clamping of rotary tool IBS/E or LBS/E in the tool post of the lathe. Shaft 8 x 10mm. Total length 65mm.
NO 24 098
Step clamp set of steel
2 step blocks and clamps each.
With matching slot nuts and fastening screws for T-slots as per MICROMOT standard (12 x 6 x 5mm). In wooden box with sliding lid.
For work pieces up to 20mm thickness
NO 24 256
For work pieces up to 35mm thickness
NO 24 257
Die holder for round dies
For threads M 3 – 4 – 5 – 6 – 8 and 10.
With holder Ø 10mm for mounting in the tailstock drill chuck of the lathe. The holder is held by hand while cutting the threads. Neatly packed in wooden box with sliding lid.
NO 24 082
Precision vice PM 40
Jaw width of 46mm. Clamping capacity 34mm. Total length 70mm.
NO 24 260
Precision V-blocks
Used to clamp various work pieces.
Made from hardened steel, precision ground in pairs. Four different depths of prism incisions V, all at 90°. Size 50 x 30 x 30mm. The solid clamp and knurled knob ensure superb securing of the workpiece. Supplied in a wooden box with sliding lid.
NO 24 262 2 pieces
14-piece parallel supports set
Ground in pairs.
For adjusting work on drilling machines, lathes and milling machines. Made of high-alloy, hardened steel (58 – 62 HRC). Parallel accuracy 0.002mm. 2 each of 8 x 10, 15, 20, 25, 30, 35 and 40mm. Length 100mm. Packed in a wooden box.
NO 24 266
Precision vice PM 60
Jaw width 60mm. Clamping capacity 42mm. Total length 100mm.
NO 24 255
Milling cutter set (2 – 5mm)
All cutters with 6mm shaft. Cutters of Ø 2 – 3 – 4 and 5mm. Double fluted according to DIN 327. Made of HSS. Comes in wooden box with sliding lid.
NO 24 610
Milling cutter set (6 – 10mm)
4 cutters Ø 6 – 7 – 8 and 10mm. Four flute design according to DIN 844. Shafts 6 and 10mm respectively. Made of HSS. Comes in wooden box with sliding lid.
NO 24 620
Three piece centre drill set
Made of HSS steel. DIN 333 (type A) 60°. Complete set centre drills with sizes of 2 – 2.5 and 3.15mm.
NO 24 630
Edge finder set
Used for fast and accurate location of starting point of work pieces with respect to the machine spindle on milling machines. Size 6 x 6 x 50mm and 6 x 5 x 75mm. Comes in wooden box with sliding lid.
NO 24 434
Parting tool holder and tool
Used in the PD 400 quickchange system. Used to part stock and cut slots. The 12 x 3 x 85mm HSS tool contains cobalt.
NO 24 417
Spare tool for parting tool holder
As described above.
NO 24 554
Cutting tools of high quality cobalt HSS steel, ground.
Five piece set
One each roughing out, parting, finishing cut, left and right cutter. Comes in wooden box with sliding lid.
8 x 8 x 80mm (for PD 230/E and PD 250/E)
NO 24 530
10 x 10 x 80mm (for PD 400)
NO 24 550
Three piece thread cutting set
One cutter for external thread (ground to 60°, metric) one for internal thread, one general cutting. Comes in wooden box with sliding lid.
8 x 8 x 80mm (for PD 230/E and PD 250/E)
NO 24 540
10 x 10 x 80mm (for PD 400)
NO 24 552
Cutting tool set for precision lathe FD 150/E.
Made of high-quality cobalt HSS steel. Ground, 6-piece.
One each boring, roughing out, parting, finishing, right and left cutter. Size 6 x 6 x 65mm. For FD 150/E. Comes in wooden box with sliding lid.
NO 24 524 6 pieces
Cutter set with tungsten inserts for PD 230/E, PD 250/E and PD 400
Three holders (90mm long)
– for roughing out;
– for longitudinal work;
– for 90mm boring bar, holes from 12mm. Standard tungsten inserts, 55°, plated (commercially available version). Three additional inserts securing screw and key TX 8 are included.
NO 24 555 8 x 8mm (for PD 230/E and PD 250/E)
NO 24 556 10 x 10mm (for PD 400)
Tungsten disposable tips
For the holders as described above.
NO 24 557 Ten piece set.
HSS boring tool set, 6 pieces
One each cutter for 60 degree (metric) and 55 degree (Whitworth) inside threads, 1.3mm – 2.65mm and 4mm. Shaft of Ø 6mm. Length 95mm. The cutters are held by a tool holder (8 x 8mm) that mounts to the tool post of either the PD 230/E, PD 250/E or PD 400. Comes in wooden box with sliding lid.
NO 24 520
